2022-03-05 13:46:42 +02:00

101 lines
3.2 KiB
C
Executable File

/**
* \file config.h
*
* \brief Peer2Peer application and stack configuration
*
* Copyright (C) 2012-2014, Atmel Corporation. All rights reserved.
*
* \asf_license_start
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* 3. The name of Atmel may not be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* 4. This software may only be redistributed and used in connection with an
* Atmel microcontroller product.
*
* THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
* \asf_license_stop
*
* Modification and other use of this code is subject to Atmel's Limited
* License Agreement (license.txt).
*
* $Id: config.h 9267 2014-03-18 21:46:19Z ataradov $
*
*/
#ifndef _CONFIG_H_
#define _CONFIG_H_
/*- Definitions ------------------------------------------------------------*/
#define BOARD_NR 1
// Address must be set to 0 for the first device, and to 1 for the second one.
#if BOARD_NR == 4
# define APP_ADDR 4
# define APP_PEER_ADDR 1
#elif BOARD_NR == 1
# define APP_ADDR 1
# define APP_PEER_ADDR 4
#else
# error "Invalid board NR."
#endif
#define APP_PANID 0x4567
#define APP_SECURITY_KEY "TestSecurityKey0"
#define APP_CHANNEL 0x0f
#define HAL_UART_CHANNEL 1
#define SERIAL_BUFFER_SIZE 150
#define SYS_SECURITY_MODE 0
#define NWK_BUFFERS_AMOUNT 3
#define NWK_DUPLICATE_REJECTION_TABLE_SIZE 10
#define NWK_DUPLICATE_REJECTION_TTL 3000 // ms
#define NWK_ROUTE_TABLE_SIZE 100
#define NWK_ROUTE_DEFAULT_SCORE 3
#define NWK_ACK_WAIT_TIME 5 // ms
#define NWK_GROUPS_AMOUNT 3
#define NWK_ROUTE_DISCOVERY_TABLE_SIZE 5
#define NWK_ROUTE_DISCOVERY_TIMEOUT 1000 // ms
//#define NWK_ENABLE_ROUTING
//#define NWK_ENABLE_MULTICAST
//#define NWK_ENABLE_SECURITY
#define DEVICE_ENDPOINT 1
#define BOT_NETWORK 0x000E
#define BROADCAST_NETWORK 0xFFFF
#define MAX_DEVICES 12
#define APP_FLUSH_TIMER_INTERVAL 20
#define RF_TX_LIST_LEN 10
#endif // _CONFIG_H_