291 lines
8.4 KiB
C++
291 lines
8.4 KiB
C++
/*
|
|
* peripherals_imu_icm.hpp
|
|
*
|
|
* Created on: Mar 5, 2021
|
|
* Author: erki
|
|
*/
|
|
|
|
#ifndef PERIPHERALS_IMU_ICM_HPP_
|
|
#define PERIPHERALS_IMU_ICM_HPP_
|
|
|
|
#include <array>
|
|
#include <limits>
|
|
|
|
#include "peripherals_imu.hpp"
|
|
#include "peripherals_utility.hpp"
|
|
|
|
namespace Peripherals
|
|
{
|
|
|
|
template<typename T, typename HAL>
|
|
class ImuIcm : public IImu
|
|
{
|
|
public:
|
|
using registers_handle = T;
|
|
using hal = HAL;
|
|
|
|
enum class GyroScale : std::uint32_t
|
|
{
|
|
DPS_250 = 0,
|
|
DPS_500,
|
|
DPS_1000,
|
|
DPS_2000
|
|
};
|
|
|
|
enum class AccelerometerScale : std::uint32_t
|
|
{
|
|
G2 = 0,
|
|
G4,
|
|
G8,
|
|
G16
|
|
};
|
|
|
|
registers_handle registers;
|
|
|
|
ImuIcm() = delete;
|
|
ImuIcm(const registers_handle& registers)
|
|
: registers(registers)
|
|
{ }
|
|
|
|
void Setup() override
|
|
{
|
|
registers.WriteRegister(_Registers::PWR_MGMT_1 & _Registers::WRITE_MASK, 0b10000000);
|
|
hal::Delay(10);
|
|
|
|
registers.WriteRegister(_Registers::USER_CTRL & _Registers::WRITE_MASK, 0b00010000);
|
|
hal::Delay(10);
|
|
|
|
registers.WriteRegister(_Registers::PWR_MGMT_1 & _Registers::WRITE_MASK, 0b00000000);
|
|
hal::Delay(10);
|
|
|
|
registers.WriteRegister(_Registers::PWR_MGMT_1 & _Registers::WRITE_MASK, 0b00000001);
|
|
hal::Delay(10);
|
|
|
|
registers.WriteRegister(_Registers::CONFIG & _Registers::WRITE_MASK, 0x03); // DLPF_CFG = 3, gyro filter = 41/59.0, gyro rate = 1KHz, temp filter = 42
|
|
hal::Delay(10);
|
|
|
|
SetGyroscopeScale(_scale_gyro);
|
|
|
|
SetAccelerometerScale(_scale_accel);
|
|
|
|
// ACCEL_FCHOICE_B = 0, A_DLPF_CFG = 3 filter=44.8/61.5 rate=1KHz
|
|
registers.WriteRegister(_Registers::ACCEL_CONFIG2 & _Registers::WRITE_MASK, 0x03);
|
|
hal::Delay(10);
|
|
|
|
// SAMPLE_RATE = INTERNAL_SAMPLE_RATE / (1 + SMPLRT_DIV) Where INTERNAL_SAMPLE_RATE = 1kHz
|
|
registers.WriteRegister(_Registers::SMPLRT_DIV & _Registers::WRITE_MASK, 0);
|
|
hal::Delay(10);
|
|
|
|
// Enable interrupt
|
|
|
|
// The logic level for INT/DRDY pin is active high.
|
|
// INT/DRDY pin is configured as push-pull.
|
|
// INT/DRDY pin indicates interrupt pulse's width is 50us.
|
|
// Interrupt status is cleared only by reading INT_STATUS register
|
|
registers.WriteRegister(_Registers::INT_PIN_CFG & _Registers::WRITE_MASK, 0);
|
|
hal::Delay(10);
|
|
|
|
registers.WriteRegister(_Registers::INT_ENABLE & _Registers::WRITE_MASK, 1);
|
|
hal::Delay(10);
|
|
}
|
|
|
|
void Calibrate(const std::uint32_t samples) override
|
|
{
|
|
std::array<std::int32_t, 3> avg_gyro;
|
|
std::array<std::int32_t, 3> avg_accel;
|
|
|
|
for (std::uint32_t i = 0; i < samples; i++)
|
|
{
|
|
std::array<std::int16_t, 3> raw;
|
|
auto add_to_avg = [&raw](std::array<std::int32_t, 3>& out)
|
|
{
|
|
for (std::uint32_t j = 0; j < 3; j++)
|
|
out[j] += raw[j];
|
|
};
|
|
|
|
ReadGyroRaw(raw.data());
|
|
add_to_avg(avg_gyro);
|
|
|
|
ReadAccelerometerRaw(raw.data());
|
|
add_to_avg(avg_accel);
|
|
}
|
|
|
|
for (std::uint32_t i = 0; i < 3; i++)
|
|
{
|
|
const std::int32_t max = std::numeric_limits<std::int16_t>::max();
|
|
const std::int32_t min = std::numeric_limits<std::int16_t>::min();
|
|
|
|
_bias_gyro[i] = Clamp(avg_gyro[i], max, min);
|
|
_bias_accel[i] = Clamp(avg_accel[i], max, min);
|
|
}
|
|
|
|
_bias_accel[2] -= AccelerometerReadingToRaw(1);
|
|
}
|
|
|
|
void SetGyroscopeScale(const GyroScale scale)
|
|
{
|
|
const std::uint8_t current_config = registers.ReadRegister(_Registers::GYRO_CONFIG | _Registers::READ_MASK);
|
|
const std::uint8_t new_config = (current_config & 0xE7) | (std::uint8_t(scale) << 3);
|
|
registers.WriteRegister(_Registers::GYRO_CONFIG & _Registers::WRITE_MASK, new_config);
|
|
|
|
_scale_gyro = scale;
|
|
}
|
|
|
|
void SetAccelerometerScale(const AccelerometerScale scale)
|
|
{
|
|
const std::uint8_t current_config = registers.ReadRegister(_Registers::ACCEL_CONFIG | _Registers::READ_MASK);
|
|
const std::uint8_t new_config = (current_config & 0xE7) | (std::uint8_t(scale) << 3);
|
|
registers.WriteRegister(_Registers::ACCEL_CONFIG & _Registers::WRITE_MASK, new_config);
|
|
|
|
_scale_accel = scale;
|
|
}
|
|
|
|
void ReadGyro(float* output) override
|
|
{
|
|
uint8_t data[6] = { 0 };
|
|
registers.ReadRegisterMultibyte(_Registers::GYRO_XOUT_H | _Registers::READ_MASK, data, 6);
|
|
|
|
for (std::uint32_t i = 0; i < 3; i++)
|
|
{
|
|
const std::int16_t bit = ByteToTypeBE<std::int16_t, 2>(&data[i * 2]);
|
|
output[i] = GyroRawToReading(bit);
|
|
}
|
|
}
|
|
|
|
void ReadGyroRaw(std::int16_t* output) override
|
|
{
|
|
uint8_t data[6] = { 0 };
|
|
registers.ReadRegisterMultibyte(_Registers::GYRO_XOUT_H | _Registers::READ_MASK, data, 6);
|
|
|
|
for (std::uint32_t i = 0; i < 3; i++)
|
|
{
|
|
output[i] = ByteToTypeBE<std::int16_t, 2>(&data[i * 2]);
|
|
}
|
|
}
|
|
|
|
void ReadAccelerometer(float* output) override
|
|
{
|
|
uint8_t data[6] = { 0 };
|
|
registers.ReadRegisterMultibyte(_Registers::ACCEL_XOUT_H | _Registers::READ_MASK, data, 6);
|
|
|
|
for (std::uint32_t i = 0; i < 3; i++)
|
|
{
|
|
const std::int16_t bit = ByteToTypeBE<std::int16_t, 2>(&data[i * 2]);
|
|
output[i] = AccelerometerRawToReading(bit);
|
|
}
|
|
}
|
|
|
|
void ReadAccelerometerRaw(std::int16_t* output) override
|
|
{
|
|
uint8_t data[6] = { 0 };
|
|
registers.ReadRegisterMultibyte(_Registers::ACCEL_XOUT_H | _Registers::READ_MASK, data, 6);
|
|
|
|
for (std::uint32_t i = 0; i < 3; i++)
|
|
{
|
|
output[i] = ByteToTypeBE<std::int16_t, 2>(&data[i * 2]);
|
|
}
|
|
}
|
|
|
|
std::int16_t AccelerometerReadingToRaw(const float& fs) const
|
|
{
|
|
return fs / _accel_fs_to_bit_constants[std::uint32_t(_scale_accel)];
|
|
}
|
|
|
|
std::int16_t GyroReadingToRaw(const float& fs) const
|
|
{
|
|
return fs / _gyro_fs_to_bit_constants[std::uint32_t(_scale_gyro)];
|
|
}
|
|
|
|
float AccelerometerRawToReading(const std::int16_t bit) const
|
|
{
|
|
return float(bit) * _accel_fs_to_bit_constants[std::uint32_t(_scale_accel)];
|
|
}
|
|
|
|
float GyroRawToReading(const std::int16_t bit) const
|
|
{
|
|
return float(bit) * _gyro_fs_to_bit_constants[std::uint32_t(_scale_gyro)];
|
|
}
|
|
|
|
private:
|
|
GyroScale _scale_gyro = GyroScale::DPS_2000;
|
|
AccelerometerScale _scale_accel = AccelerometerScale::G16;
|
|
|
|
std::array<std::int16_t, 3> _bias_gyro;
|
|
std::array<std::int16_t, 3> _bias_accel;
|
|
|
|
static constexpr float _accel_fs_to_bit_constants[4] = {
|
|
(2.0f / 32768.0f),
|
|
(4.0f / 32768.0f),
|
|
(8.0f / 32768.0f),
|
|
(16.0f / 32768.0f)
|
|
};
|
|
|
|
static constexpr float _gyro_fs_to_bit_constants[4] = {
|
|
(250.0f / 32768.0f),
|
|
(500.0f / 32768.0f),
|
|
(1000.0f / 32768.0f),
|
|
(2000.0f / 32768.0f)
|
|
};
|
|
|
|
struct _Registers
|
|
{
|
|
static constexpr std::uint32_t ICM20689_ID = 0x98;
|
|
|
|
static constexpr std::uint8_t READ_MASK = 0x80;
|
|
static constexpr std::uint8_t WRITE_MASK = 0x7F;
|
|
|
|
static constexpr std::uint8_t SMPLRT_DIV = 0x19;
|
|
static constexpr std::uint8_t CONFIG = 0x1A;
|
|
static constexpr std::uint8_t GYRO_CONFIG = 0x1B;
|
|
static constexpr std::uint8_t ACCEL_CONFIG =0x1C;
|
|
static constexpr std::uint8_t ACCEL_CONFIG2=0x1D;
|
|
|
|
static constexpr std::uint8_t INT_PIN_CFG = 0x37;
|
|
static constexpr std::uint8_t INT_ENABLE = 0x38;
|
|
static constexpr std::uint8_t INT_STATUS = 0x3A;
|
|
|
|
static constexpr std::uint8_t GYRO_XOUT_H = 0x43;
|
|
static constexpr std::uint8_t GYRO_XOUT_L = 0x44;
|
|
static constexpr std::uint8_t GYRO_YOUT_H = 0x45;
|
|
static constexpr std::uint8_t GYRO_YOUT_L = 0x46;
|
|
static constexpr std::uint8_t GYRO_ZOUT_H = 0x47;
|
|
static constexpr std::uint8_t GYRO_ZOUT_L = 0x48;
|
|
|
|
static constexpr std::uint8_t ACCEL_XOUT_H =0x3B;
|
|
static constexpr std::uint8_t ACCEL_XOUT_L =0x3C;
|
|
static constexpr std::uint8_t ACCEL_YOUT_H =0x3D;
|
|
static constexpr std::uint8_t ACCEL_YOUT_L =0x3E;
|
|
static constexpr std::uint8_t ACCEL_ZOUT_H =0x3F;
|
|
static constexpr std::uint8_t ACCEL_ZOUT_L =0x40;
|
|
|
|
static constexpr std::uint8_t USER_CTRL = 0x6A;
|
|
static constexpr std::uint8_t PWR_MGMT_1 = 0x6B;
|
|
static constexpr std::uint8_t PWR_MGMT_2 = 0x6C;
|
|
static constexpr std::uint8_t WHO_AM_I = 0x75;
|
|
|
|
static constexpr std::uint8_t XG_OFFSET_H = 0x13;
|
|
static constexpr std::uint8_t XG_OFFSET_L = 0x14;
|
|
static constexpr std::uint8_t YG_OFFSET_H = 0x15;
|
|
static constexpr std::uint8_t YG_OFFSET_L = 0x16;
|
|
static constexpr std::uint8_t ZG_OFFSET_H = 0x17;
|
|
static constexpr std::uint8_t ZG_OFFSET_L = 0x18;
|
|
|
|
static constexpr std::uint8_t XA_OFFSET_H = 0x77;
|
|
static constexpr std::uint8_t XA_OFFSET_L = 0x78;
|
|
static constexpr std::uint8_t YA_OFFSET_H = 0x7A;
|
|
static constexpr std::uint8_t YA_OFFSET_L = 0x7B;
|
|
static constexpr std::uint8_t ZA_OFFSET_H = 0x7D;
|
|
static constexpr std::uint8_t ZA_OFFSET_L = 0x7E;
|
|
};
|
|
};
|
|
|
|
template<typename T, typename HAL>
|
|
constexpr float ImuIcm<T, HAL>::_accel_fs_to_bit_constants[4];
|
|
|
|
template<typename T, typename HAL>
|
|
constexpr float ImuIcm<T, HAL>::_gyro_fs_to_bit_constants[4];
|
|
|
|
}
|
|
|
|
#endif /* PERIPHERALS_IMU_ICM_HPP_ */
|